Home > > 0404001119


Categories: Tags:
  1. luke
    June 12th, 2012 at 01:11 | #1

    Hey, What are those faders that you have installed? I would love to figure out how to have more controll of the effects and find some distortion or filter ect.. I messaged you a while back and you said you would do a post on how to bend the ca100, If you could shoot me an e-mail or make a post on anything you know about bending this board I would be eternally greatfull as there is no information out there about the CA100.

  2. luke
    June 12th, 2012 at 01:11 | #2

    bustedbikes@hotmail.com if you need to e-mail me

  3. James
    January 20th, 2013 at 13:02 | #3

    the faders are a bunch of connections to various places that cause output from various key presses. I have since updated the keyboard and have switches to activate key presses at all the octaves so you can turn them on and then press the glitch button to create the crazy loops.

    In this image it shows the two glitches that I have connected… the outer wire is connected to two separate buttons and the pins 8 and 9 on the chip go to those buttons respectively. This glitches the chip if you are holding down a key press creating a sound with the keyboard and you press on of the glitch buttons.

  1. No trackbacks yet.